Top Benefits Of Blown Optical Fibre
Do you want to replace your traditional cabling installation? One of the latest cabling solutions that you could try is the blown optical fibre. Why? Let me share with you a list of top benefits that a blown optical fibre cabling solution can offer than traditional cabling solution made from copper wires. But, before that here’s a quick overview on blown optical fibre.
Introduction to Blown Optical Fibre
Blown optical fibre is a type of cabling solution that uses glass fibre material instead of the traditional copper wires. The installation is performed by blowing through a micro-duct pipe. During the procedure, the optic fibres are blown using compressed air. With blown optical fibre the installation is less complicated because the optic fibres are flexible enough to work even on tight bends.
Benefits of Blow Optical Fibre
The actual installation of blown optic cabling solution is a lot simpler than the copper cabling. Groundwork is only done once, then, waterproof ducting is carried by blowing needed optic fibres. A single ducting pipe can approximately hold 288 optic fibres. For future enhancement targeting more than 1000 optic fibres the procedure should be done within the twelve months period.
Unlike copper cabling, the blow optic cabling uses compressed air technology for installation and has the capacity to blow a single or more optic fibres in one go, even on complex routes and bends. So, you will only pay what your business needs at the moment. In the event you have a future expansion, the cost to install is computed based on additional optic fibres used.
Yes, with blown optical fibre solution the installation is faster when compared with traditional cabling made from copper wires. The expected turnaround for completion of 3,000 – foot installation is approximately less than one day than copper cabling that will normally consume three days. Apart from that, fewer workers are needed to install blown optic than copper cable wires. For blown optical fibre only one to two workers are required to do the job, but with traditional copper cabling, four workers or more are needed.
Since the installation of the blown optic is a lot simpler and quicker future goals for upgrades or expansions are made flexible. In fact, you can make plans for an upgrade in a few hours, get an estimate of the project cost and have it installed right away. With traditional copper cabling, this planning needs to take months or even years before you can have it installed. Blown optical fibre cabling solution saves you time and help you invest wisely as your business grows.
What establishments or business can benefit from blown optic fibre?
- Offices (public and private offices)
- Healthcare providers
- Sports facilities
- Others buildings and venues needing uninterrupted network system
Have you finally decided to install blown optical fibre cabling solution? If your business is located in Australia and prefer a local cabling solution company contact now GM Cabling Solutions for expert advice on cabling packages including other services (audio visual equipment installation, underground cabling, electrical and communications). Take control of your business and pay on what you need by choosing the right cabling solution package.
For more information, contact GM Cabling today.