Tag Archives: network cabling in Sydney

Network Cabling Sydney – Priority on cable management.

The manner in which network cables are installed into a server rack is absolutely essential to IT efficiency. Not only does it improve the aesthetic look of the server rack/room but it also improves upon system performance and greatly diminishes the chance of cable damage or failure which could have a domino effect on the entire business.  GM Cabling Solutions who provide network cabling in Sydney ensure impeccable network design through their trained staff that will go the extra mile to provide solutions.

As mentioned above cable management doesn’t just solve aesthetic solutions it solves performance solutions. Cleaning up a nightmare in the server room can have a number of positive performance factors, those being:

  • Separating power usage within server racks significantly lowering any chance of interference.
  • Ease of access for installation and devices due to freedom of space provided via cable management.
  • Cooling improvements due to increased airflow paths for hot exhaust air.

As more and more businesses understand that data and network cabling in Sydney is so important to every office, installers must perfect their method of cable management. Common methods used by professionals include:

  • Horizontal/vertical cable clips.
  • Cable trays.
  • Fiber optic patch panels.
  • Copper patch panels.

When seeking network cabling in Sydney makes sure your provider understands the importance of cable management and the domino effect it has on the overall effectiveness of the office. Seek professionals who attend training seminars, online webinars and local trade shows as these are the ones who will provide you with all your cabling solutions.

5 Reasons to invest in Underground Electrical Cabling

Every commercial office fit out needs to have underground cabling. This is important for several reasons. Among the most important ones is that it ensures a consistent and steady stream of electrical supply at all times. Further, it can provide many other benefits to the business owners as well. Here are some of these benefits:

Reasons to get Underground Electrical Cabling

  1. Safety

Underground electrical cable setups are much more secure from accidental damage than other types of wiring. This is because they cannot be stepped on or otherwise hampered with. This ensures that your office will have the necessary supplies without interruption. Also, such power uninterruptible power supplies are very durable so you can save money there are as well.

  1. Thicker Wiring

Underground wiring also gives the advantage of threading more wires through one channel. This means that you can have more power output options through the same channel. Also, this means your cable management options become much more streamlined.

  1. Better Coordination

Commercial office fit outs that remain on the surface can lead to coordination problem. They are often mismanaged that can result in confusion. This can really hamper the process of repair if ever needed. So, instead, you can go for underground electrical cabling. This will help keep your office wiring organized efficiently.

  1. Visual Appeal

Visual appeal is not the first thing that office owners might think about when they are structuring their office. However, it does matter a lot. Wiring bunches standing out in the corners are hardly appealing. Underground electrical cable can solve this problem easily by keeping everything out of sight.

  1. Maintenance

Maintenance can take a toll on your work efficiency. If you have exposed wiring, you will not only need to stall work but may also need to spend more money. Of course, this is not the best of ideas and so, you should opt for a commercial office fit out that use underground electrical cable. This will save you a lot of time and money in the long run.

How to Get the Best Underground Electrical Wiring for Your Office?

GM Cabling Solutions is one of most trusted companies in Australia for commercial office fit outs. We have many services on offer that you can avail. From network cabling in Sydney to uninterruptible power supplies, we can give you all the electrical fit out services you need. Contact GM Cable now!

Rules for Network Cabling in Sydney – What we need to know

This is to introduce that there are certain rules set by Australian Communication and Media Authority (ACMA) for network cabling in Sydney The objective of these set standards is to set out the minimum requirements that may ensure safety and integrity of a cabling installation system.

Following below are the set rules for Network Cabling:

  1. Safe and sound practice

All customers cabling installation should be done with principles of Safe and sound practices. That may lead to injury of cabling provider or any other person, such as:

  1. Put visible marking while doing cable installation, that are misleading, or
  2. Physical protrusions in traffic prone areas.

  1. Manufacturer’s Instruction Manual

All cable related equipment should have its installation under the guidelines of its manual including the electrical distribution board approval on it, such as things like cable radius, tension, cable tie pressure colour code etc.

  1. Compliance Labelling

None of the cabling should be installed in any customer premises which are not labelled with accordance of Telecommunication Notice.

  1. Protection against damage

All part of installation should have adequate protection against damage which might be expected to result from mechanical injury, exposure to weather, water retention or any other circumstance to which they will be exposed under the condition of their usage.

  1. Hazardous Voltages

Cabling shall not be used to carry a hazardous voltage especially for underground electric cable installation.

  1. Cable Joints

A cable joint has a vital role to play for all types of cables, using suitable connectors, joiners, compression fittings or other compliant devices. It also includes the physical protection of the joints.

In Sydney, Gm Cabling Solutions is one of the top companies specialized in network cabling system. We provide all kinds of cable installation with in the ACMA Standards. Visit our website to know more about us.

3 Reasons to Invest in a Quality Electrical Distribution Board

 

Technology has grown by leaps and bounds in the recent years. Just a few decades ago, we had phones bigger than faces, now we can talk hands-free. So, it’s not surprising that we often overlook. Commercial office fit outs and data cabling in Sydney fall into this category of overlooked technologies.

We naturally assume that the office will have a well laid out electrical wiring system. However, that is not always true. This can be a problem later as your business grows and your energy demands increase.

The most important of all commercial office fit outs in the managing hub or electrical distribution board. Having a well built and smartly designed board offers many benefits to both offices and residences. Here’s a short list:

  • 3 Key Benefits from Quality Electrical Distribution Board

  • Proper Electrical Distribution

Complicated wire overlays and wiring knots are every electrician’s nightmare. They not only cause confusion but lead to improper electrical distribution as well. Getting the right electrical distribution board will help keep electrical lines separate. This will protect your overall electrical system and also make sorting short circuits much easier.

  • Easy Modifications

Commercial office fit outs usually don’t need modifications. But growing businesses have growing needs. You may need data cabling in Sydney or underground electrical cables for increased efficiency. In all such cases, you need to have a well-designed electrical distribution board. This will help you get the most from your previous wiring system. Also, it will help in making additions easier.

  • Technological Enhancements

Aside from electrical technology itself, your business can benefit from other innovations as well. For example, fibre optic cable installation gives your business high-speed internet without faults. This can be a game-changer for your business and put it on the fast track to success. Implementing this technology and others can be expensive.

However, if your basic commercial office fit out and electrical distribution board are well-defined, then you can save costs. Further, as technology evolves making additions will remain cheaper until your entire system gets outdated in the long term. So, starting with the right setup is very important.

  • Where Can You Get the Best Cabling Solutions in Sydney?

GM Cabling Solutions is one of the top companies for commercial office fit outs in Australia. We provide all kinds of electrical services to our clients, ranging from network cabling in Sydney to uninterruptible power supplies. Visit GM Cabling Solutions and get in touch with our experts today!