In recent years, a slew of digital audio and video equipment has proliferated modern business, providing many useful functions. Within this rather broad category of technology is a plethora of valuable tools for business. Resulting from this, audio visual equipment installation has been in high demand. Most of these systems will be connected to the business’ network for storage or fetching of data, so they will require data cabling in Sydney to install.
There are many pieces of technology involved in audio visual equipment installation projects, some of the main ones include:
- Projectors and screens – these are used both for office based purposes like meeting displays and conferences and also for public messages in open spaces. Often, outdoor or public systems of screens will need to be connected using data cabling in Sydney.
- Interactive whiteboards – these see extensive use in school settings but also appear in some modern businesses. They function like normal projectors and monitor displays for conferences but allow annotating and interaction with a pen on the screen.
- CCTV surveillance – these have been common security measures for some time, they make monitoring a building easier. They act mainly as a deterrent, with proven reductions in theft from businesses and homes with this audio visual equipment installation.
- PA Systems – a slightly older technology but is still used extensively in almost any business. They are relatively simple, allowing mass audio announcements across a series of loudspeakers.
GM Cabling are experts of data cabling in Sydney, who provide a wide range of audio visual equipment installation services. They can also assist in the training of staff and maintenance of some systems. Contact us today for more information.
Network connections make many business’ IT solutions possible, with any wired access to the internet or internal servers requiring data cables. Data cabling Sydney follows a range of standards for speed, distance and interference reduction, these are laid out by national and international bodies. For the speed and capacity required by many businesses, Wi-Fi connections simply aren’t sufficient. To mitigate this, wired network cabling solutions are needed. In general, the cables used for internet connection and data cabling Sydney are known as Ethernet cables. These come in a range of categories.
- Cat5e – and advancement of the previous cat5 cables, these are the earlier standard still recognized today. They have completely replaced cat5 and are the most commonly used in data cabling Sydney at the moment. They support speeds of up to 1Gbps.
- Cat6 – a major improvement on its predecessor, these cables can be shielded to prevent interference and can support maximum speeds of 10Gbps for 50 metres, or the 1Gbps of the previous standard for 100 metres.
- Cat6a – a revised version of the previous standard which allows longer transmission at its highest speeds and implements much better shielding and crosstalk elimination.
- Cat7 – a very new standard where each fibre is individually shielded to ensure maximum integrity of data. These can only transmit at shorter distances but can do so at up to 10Gbps.
GM Cabling is a long time trusted provider of data cabling Sydney. Their innovative and high-quality cabling solutions allow your business to connect and interact at the best speeds and reliability possible. Contact us today for information on a new office data solution.
Office electrical and data systems are often very large systems. The plethora of varying connections tends to make them confusing for many business owners. There are a few essential elements to any commercial office fit out which will keep your business running smoothly and safely. GM Cabling who provides network cabling Sydney can supply and install many of these systems for your business.
Most commercial office fit out systems must be wired together to function correctly, this includes internet, phone, and server connections. Network cabling Sydney suppliers such as GM Cable can install and connect such systems to keep offices running smoothly and efficiently. Network cables come in many versions for different tasks; the main ones are Cat5e, Cat6, Cat6a, and Cat7. Higher numbers indicate newer versions that have larger bandwidths and better transmission speeds. Cat6a is capable of transmitting larger distances up to 100m with no loss, which may be very desirable in network cabling Sydney. Cat7 is a very new standard offering much higher speeds but at considerably shorter distances.
Uninterruptable Power Supplies (UPS)
These systems are staples of many commercial office fit out as they are great for offices with important computer systems or servers which must remain online at all times. They are placed between the mains power and the computer/server. In the event of power interruptions, they keep the machine powered until a secondary power source can be started or the machine is shut down safely. This is great for protecting important files and devices in your office network.
GM Cables are commercial office fit out specialists who provide the highest quality cabling electrical solutions for their clients. Contact us today for more information.
Why network cabling?
Network cabling solutions in the home is required mainly because of two reasons – speed and reliability on network. Network cabling is one of the fastest using cable networking than Wi-Fi connection and is not affected by the wall, distance, interference from other sources, or competing Wi-Fi networks. It’s much faster and much more reliable. The motive is to have network port usage. It is also important to note that network cabling is also reliable for file sharing. Network cabling in Sydney distributes all sorts of services around the home including phone, TV, HDMI, Poe and probably it includes other stuff in the future.
According to NSW network cabling rules in Sydney, it’s mandatory to have your home cable fixing to be done by registered professional network cable installer, because it involves underfloor, in-wall or in-roof cabling by registered cable solutions.
The structured cable network types
If you decide to install network cabling in your home you will be asked whether you want so-called category-5, category-6, or category-6a cable. These are standard government rules for any physical construction of the cable and how fast it will carry the data around the home. There is one more network cabling solution referred to an Ethernet overpower or EoP, which used an adapter to convert voltage from the main wiring into a network of sorts.
It’s also important to note that network cabling is a generic means of distributing all sorts of services around the home including phone, TV, HDMI, PoE (Power over Ethernet), and probably others in the future. GM Cabling Solutions is a registered network cabling installer in Sydney, which fulfil all your needs as per standards.
The Service and Installation Rules of New South Wales (the Rules) is the recognized industry code outlining the requirements of electrical distributors when linking a customer to the distribution systems of New South Wales.
There are certain consumer main installation conditions, which are as follows:
- Applicants who want to get underground electrical cable wiring installation have to take the responsibility of on-location underground pipes and cables from communications, gas, water and electricity providers.
- Cable using for installation should be laid in accordance with the current ETSA utility services and installation rules, ETSA utilities notice to electrical workers, and standards Australia AS/NZS3000 – wiring rules.
- The underground electrical cables shall be laid across the footway at 90 degrees to the property line.
- Galvanized steel tubing is required to be installed for mechanical protection of underground
- Consumer mains cables at the horizontally installed depth across Council land.
- The Council will accept no responsibility for any damage to the electrical service from any cause whatsoever.
- A proper cable installation alignment wiring framework has to be set up.
To get your underground electrical cabling done with Gm Cable.
Distribution Board is an electricity supply system or a common inclusion that distributes the electrical power feed into subcircuits. There are different distributor boards:
A main electrical distribution board (MEDB)
Sub electrical distribution board (SEDB)
A final electrical distribution board (FEDB)
The Phase and Neutral supply lines are fed to the Distribution board through the service drop running from the utility pole. It is then connected to the energy meter through a fuse.
In the second phase, the neutral line from the energy meter is directly connected to the main isolator. The isolator is used to open and close the lines manually, which is the main switch of the electrical system for network cabling solutions.
Once the isolator is connected to the residential current board, then the residential current board device used to protect from current leakage from the circuit.
For electrical distribution board, wiring below accessories is required, like fuses, isolators, circuit breakers, single-pole MCB, miniature circuit breaker, and circuit breaker.
Get in touch with our expert electrician in Sydney for your Distribution board fitting.
Information Source: NSW Electrical Board Guidelines
The whole set up process of electrical distribution boards has been changed in the past few years. There are more secure protected ways of panels we can use.
Electrical Distribution Boards installation Process need a selection of proper equipment along with the manufacturer’s instructions. Designers and installers must select a wiring system that avoids damage to the sheath and insulation of cable during installation, use, and maintenance. Where cable enters a distribution board from trunking, the cables must be protected from any sharp edges in order to comply with board setups. There are proper diagrams that need to be followed while designing the electrical board circuit.
Skills and Instructed Person Requirements for Electrical Distribution Boards
Where there are large fault currents required, you should also consider the type of person who will operate the devices, manage the faults in distribution boards. Though manufacturers are responsible for ensuring the capacity of the equipment between the incoming and outgoing current terminals for the electrical distribution board, which includes busbars and connections as well as incoming and outgoing devices.
NSW standards rules for installing Electrical Distribution Boards
To ensure that the electrical installation of a customer can be connected to the distribution system, the electricity distributor can describe the requirements of the connection to its system and compatible requirements of the electrical installation process. Certain rules for installation process –
- By providing consistent requirements from electricity distributors.
- Specifying electrical installation requirements as approved by the department.
- Complete information should be provided by electricity Supply Company, metering providers, etc.
If you are looking for your electrical board installers, then visit us at gmcable.com.au today!!
Data Cabling Solutions in Sydney – As specialists in Data Cabling we offer a wide range of custom-made network solutions for your business or home. We work in building new data cable wiring or in renovations of data cables as well and also we are specialized in Commercial office fit-out for data cabling solutions.
We are serving in a wide area of Sydney for over 10 years. In addition, we have highly skilled technicians who save your money on data cabling installation with their superior skills and training.
We majorly deal below various DATA Cabling Sydney Solutions –
- Structured Cabling systems.
- Network Design, planning and implementation
- Cable system audits and complete project documentation.
- Distributed Antenna Systems (DAS)
- Complete testing of high Australian Standards for all kind of data cabling solutions.
Is your business looking for the renovation of your data cabling installation? Visit us at www.gmcable.com.au or call us on 02 4647 6653 for more information.
An electrical distribution board is a panel-based board that controls the electric power feed and equally distribute in circuits. Often, there are also local regulations as to how these boards are configured by professionals who do electrical works on a regular basis that delivers quality and suitable flow of electricity in a circuit.
The electrical Distribution board at home is different from comparing one in commercial places like restaurants, shops, etc. All internal and external lighting systems shall be designed to enhance safe movement, personal safety, and security for any electrical distribution board designing. The distribution board shall be tested before use, the construction arrangements should be proper. A most important point to remark for all electrical distribution boards is that they are made with large enough space( cater) for main incoming and outgoing cables and the positioning of transformers, terminal blocks, and contractors so that cable to these items can be done in a proper manner and it works appropriately incomplete circuit of current flow.
The above description is inapplicable for both wall-mounted or underground electrical cable solutions. All light and power circuits are to be loaded to less than 75% of their rated capacity. Visit our website on GM Cable and get your electrical distribution board done.
Cameras are an absolute necessity for any business when it comes to security. All it takes is for one camera to deter theft and petty crimes from occurring in your property/management. However, it is also important to have multiple angles set up and cabled correctly. Audiovisual equipment can also be used to gain further details on events that may transpire and become useful and valuable in a legal matter, speeding up the process of courts. Cameras also allow proprietors to monitor staff while working to make sure the right work is being done and that there is no theft or other wrongdoings occurring within the staff ranks. Hence, cameras are vital to any workplace in ensuring safety, discipline, and security so it is absolutely imperative that the laws surrounding this type of equipment are understood.
When installing audiovisual equipment it must be ensured that the entire room is monitored and not just a small section of it. As under the telecommunications (Interception and Access) Act 1979 (Cth), it is illegal to record a private conversation and even worse to share and distribute this conversation. Most audiovisual equipment installations are quite simple however as the law is quite clear on what is considered an offense.
“As long as the installation, use or maintenance of an optical surveillance device does not involve the unauthorized entry onto/into a premise or vehicle or unauthorized interference with a vehicle or other object, it is not an offense”
That being said, the writing of other laws does apply to cameras as well, as consent is still required even in your own property. For example, it is still considered an offense to install audiovisual equipment in the bathroom of your own home without a person consent to be filmed (based on image-based abuse laws in NSW)
GM Cabling provides cabling solutions and will even equip and install audio visual equipment for businesses and even going as far as design and project management. Inquire today at www.gmcable.com.au